.. _test-cases: Conformance Test ################ The Conformance Test Specification – Part 2: Radio Protocols (`ETSI TS 104 047-2 V1.1.1 (2025-10) `_) discribes in chapter A3.1 the following test system configurations: * **CF01**: Test System as an observer * **CF02**: Test System in PT mode * **CF03**: Test System in FT mode * **CF04**: Test System as FT + PT * **CF05**: Test System as FT + FT * **CF06**: Test System as FT + PT + FT-PT .. note:: The following table is based on `ETSI TS 104 047-2 V1.1.1 (2025-10) `_. Test cases/Test Purpose (TP ID) of chapter 7 and mapping to the test sequences for chapter 8. Total test cases: **56** (MAC: 44, DLC: 8, CVG: 4) .. todo:: We need to consider which test cases the opener stack must include in its initial development stage. +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | TP ID | Test Objective | Reference | EUT Mode | Config | PICS Selection | Mapping to Sequence | Status | Status Notes (PICS Reference) | +==========================+==============================================================+==================================================+===============+============================================+====================================================+=========================================================+==========+=========================================================+ | DECTNR/MAC/SPM/BEA/01 | Check that the IUT sends a valid Network Beacon message | ETSI TS 103 636-4 [4], clause 6.4.2.2 | FT | CF01 | pc_mac_bea_network_tx | 8.1.1.1 Beaconing Transmission | o | pc_mac_bea_network_tx is optional (Table B.2.3-1d) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/BEA/02 | Check that the IUT sends a valid Cluster Beacon message | ETSI TS 103 636-4 [4], clause 6.4.2.3 | FT | CF01 | pc_mac_bea_cluster_tx | 8.1.1.1 Beaconing Transmission | m | pc_mac_bea_cluster_tx is mandatory for FT (Table | | | | | | | | | | B.2.3-1d) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/BEA/03 | Check that the IUT sends the Cluster Beacon according to the | ETSI TS 103 636-4 [4], clauses 5.1.5 and 6.4.2.3 | FT | CF01 | pc_mac_bea_cluster_tx AND pc_mac_bea_cluster_nc | 8.1.1.2 Operating Channel(s) and Subslot(s) selection | o | pc_mac_bea_cluster_nc is optional (Table B.2.3-1d) | | | channel information provided in a preceding Cluster Beacon | | | | | | | | | | message | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/BEA/04 | Check that the IUT sends Network Beacons at the indicated | ETSI TS 103 636-4 [4], clause 6.4.2.2 | FT | CF01 | pc_mac_bea_network_tx | 8.1.1.1 Beaconing Transmission | o | pc_mac_bea_network_tx is optional (Table B.2.3-1d) | | | interval | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/BEA/05 | Check that the IUT sends Cluster Beacons with the indicated | ETSI TS 103 636-4 [4], clause 6.4.2.3 | FT | CF01 | pc_mac_bea_cluster_tx | 8.1.1.1 Beaconing Transmission | m | pc_mac_bea_cluster_tx is mandatory for FT (Table | | | periodicity when beaconing | | | | | | | B.2.3-1d) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/BEA/06 | Check that the IUT sends the Cluster Beacon according to the | ETSI TS 103 636-4 [4], clauses 5.1.5 and 6.4.2.2 | FT | CF01 | pc_mac_bea_cluster_tx AND pc_mac_bea_cluster_ttn | 8.1.1.2 Operating Channel(s) and Subslot(s) selection | o | pc_mac_bea_cluster_ttn is optional (Table B.2.3-1d) | | | time information provided in a preceding Cluster Beacon | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/BEA/07 | Check that the IUT sends the Cluster Beacon message | ETSI TS 103 636-4 [4], clauses 5.1.5 and 6.4.2.2 | FT | CF01 | pc_mac_bea_network_tx | 8.1.1.1 Beaconing Transmission | o | pc_mac_bea_network_tx is optional (Table B.2.3-1d) | | | according to the information provided in a preceding Network | | | | | | | | | | Beacon message | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/OCS/01 | Check that the operating channel is selected from the | ETSI TS 103 636-4 [4], clause 5.4 | FT | CF01 | pc_mac_ocs | 8.1.1.2 Operating Channel(s) and Subslot(s) selection | m | pc_mac_ocs is mandatory for FT (Table B.2.3-1a) | | | operating band | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/OCS/02 | Check that the operating channel the IUT chooses is | ETSI TS 103 636-4 [4], clause 5.1.2 | FT | CF01 + SG | pc_mac_ocs | 8.1.1.2 Operating Channel(s) and Subslot(s) selection | m | pc_mac_ocs is mandatory for FT (Table B.2.3-1a) | | | sufficiently free | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/OCS/03 | Check that the IUT re-initiates the operating channel and | ETSI TS 103 636-4 [4], clause 5.1.2 | FT | CF01 + SG | pc_mac_ocs_reselect | 8.1.1.2 Operating Channel(s) and Subslot(s) selection | o | pc_mac_ocs_reselect is optional (Table B.2.3-1a) | | | sub-slot selection procedure when its current channel gets | | | | | | | | | | busy | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/PC/01 | Check that the IUT uses the minimum TX power for achieving | ETSI TS 103 874-2 [7], clause 7.2.1.6 | PT | CF03 | pc_smcb_mac_pc_initial | 8.1.1.3.1 Initial Transmit Power | c | pc_smcb_mac_pc_initial: IF pc_smcb THEN optional (Table | | | its target quality | | | | | | | B.2.3-1e c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/PC/02 | Check that the IUT follows the TX power limits of a cluster | ETSI TS 103 636-4 [4], clause 5.1.6 | PT | CF03 | pc_mac_pc | 8.1.1.3.2 Dynamic Power Control | m | pc_mac_pc is mandatory (Table B.2.3-1e) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SPM/RDS/01 | Check that when the IUT selects an RD for association, it | ETSI TS 103 636-4 [4], clause 5.1.4 | PT | CF05 | pc_mac_rds | 8.1.1.4 Selecting RD for association | m | pc_mac_rds is mandatory for PT (Table B.2.3-1c) | | | selects an RD that meets the minimum quality requirement | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/RACH/TX/01a | Check that the IUT transmits on received random-access | ETSI TS 103 636-4 [4], clause 5.3.3 | PT | CF03 | pc_mac_rach_tx | 8.1.3.1a Transmission on Random-Access resources | m | pc_mac_rach_tx: mandatory if PT mode (Table B.2.3-3 | | | resources | | | | | received from beacon message | | c.4) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/RACH/TX/01b | Check that the IUT transmits on random-access resources | ETSI TS 103 636-4 [4], clause 5.3.3 | FT | CF02 | pc_mac_rach_tx AND pc_smcb | 8.1.3.1b Transmission on Random-Access resources | o | pc_mac_rach_tx: optional if FT mode, requires pc_smcb | | | received by unicast signalling from an RD which it has | | | | | received in unicast message | | (Table B.2.3-3 c.4) | | | association to | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/RACH/TX/02 | Check that the IUT refrains from transmitting to random- | ETSI TS 103 636-4 [4], clause 5.3.1 | FT or PT | IF Mode=FT: CF02+SG; IF Mode=PT: CF03+SG | pc_mac_rach_tx; IF Mode=FT: pc_smcb | 8.1.3.2 Listen Before Talk | m/o | m if PT mode, o if FT mode (Table B.2.3-3 c.4) | | | access resources if the channel is 'busy' | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/RACH/TX/03 | Check that the IUT does not exceed the random-access | ETSI TS 103 636-4 [4], clause 5.3.3 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_rach_tx; IF Mode=FT: pc_smcb | 8.1.3.3 Random Access Data Transmission | m/o | m if PT mode, o if FT mode (Table B.2.3-3 c.4) | | | resource limits | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/RACH/RX/01a | Check that the IUT receives a packet from its random-access | ETSI TS 103 636-4 [4], clause 5.3.2 | FT | CF02 | pc_mac_rach_res_bea | 8.1.3.4a Random Access Reception and Response | o | pc_mac_rach_res_bea: optional for FT (Table B.2.3-3 | | | resources and sends a random-access response | | | | | (Announced in beacon message) | | c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/RACH/RX/01b | Check that the IUT receives a packet from its random-access | ETSI TS 103 636-4 [4], clause 5.3.2 | PT | CF03 | pc_mac_rach_res_uni | 8.1.3.4b Random Access Reception and Response | o | pc_mac_rach_res_uni: optional if mesh (Table B.2.3-3 | | | resources and sends a random-access response | | | | | (Announced in unicast message) | | c.2) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/RACH/RX/02 | Check that IUT discards any packets not intended for it | ETSI TS 103 636-4 [4], clause 5.5.2 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_rach_rx; IF Mode=PT: pc_smcb | 8.1.3.4a Random Access Reception and Response | m | pc_mac_rach_rx: mandatory if RACH resources supported | | | | | | | | (Announced in beacon message) 8.1.3.4b Random Access | | (Table B.2.3-3 c.3) | | | | | | | | Reception and Response (Announced in unicast message) | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/RACH/RX/03 | Check that the IUT is able to include a buffered message to | ETSI TS 103 636-4 [4], clause 5.5.2 | FT | CF02 | pc_mac_rach_rx | 8.1.10.1 Paging | m | pc_mac_rach_rx: mandatory if RACH resources supported | | | a random-access response | | | | | | | (Table B.2.3-3 c.3) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/HARQ/TX/01 | Check that IUT ends the HARQ procedure when it receives | ETSI TS 103 636-4 [4], clause 5.3.4 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_harq_tx | 8.1.5.1 HARQ Transmission | o | pc_mac_harq_tx is optional (Table B.2.3-5) | | | feedback indicating ACK and indicates new data on next | | | | | | | | | | transmission | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/HARQ/TX/02 | Check that the IUT uses the redundancy version 0 for HARQ | ETSI TS 103 636-4 [4], clause 5.5 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_harq_tx | 8.1.5.1 HARQ Transmission | o | pc_mac_harq_tx is optional (Table B.2.3-5) | | | re-transmission when receiving NACK feedback in format 6 | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/HARQ/TX/03 | Check that the IUT uses the next redundancy version for HARQ | ETSI TS 103 636-4 [4], clause 5.5 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_harq_tx | 8.1.5.1 HARQ Transmission | o | pc_mac_harq_tx is optional (Table B.2.3-5) | | | re-transmission when receiving NACK feedback in format 1, 3, | | | | | | | | | | 4, or 5 | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/HARQ/TX/04 | Check that the IUT does not perform HARQ re-transmissions | ETSI TS 103 636-4 [4], clause 5.5 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_harq_tx | 8.1.5.1 HARQ Transmission | o | pc_mac_harq_tx is optional (Table B.2.3-5) | | | after delay Max HARQ Re-Tx | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/HARQ/FB/01 | Check that IUT sends a NACK as HARQ feedback when PDC | ETSI TS 103 636-4 [4], clause 5.5.2 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_harq_feedback | 8.1.5.2 HARQ Feedback | m | pc_mac_harq_feedback is mandatory (Table B.2.3-5) | | | decoding fails for packet requesting feedback | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/HARQ/FB/02 | Check that IUT sends an ACK as HARQ feedback for successful | ETSI TS 103 636-4 [4], clause 5.5.2 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_harq_feedback | 8.1.5.2 HARQ Feedback | m | pc_mac_harq_feedback is mandatory (Table B.2.3-5) | | | reception of packet requesting feedback | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/MUXA/01 | Check that any MAC PDU transmitted by the EUT can be | ETSI TS 103 636-4 [4], clause 5.6 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_muxa | 8.1.6.1 MAC IE Multiplexing | m | pc_mac_muxa is mandatory (Table B.2.3-6) | | | logically parsed into IEs | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/MUXA/02 | Check that the IUT includes a Padding IE to a MAC PDU such | ETSI TS 103 636-4 [4], clause 5.6 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_muxa | 8.1.6.1 MAC IE Multiplexing | m | pc_mac_muxa is mandatory (Table B.2.3-6) | | | that it fills it to the next TBS size | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/MOB/01 | Check that the IUT performs the mobility procedure when it | ETSI TS 103 636-4 [4], clause 5.7 | PT | CF05 | pc_mac_mob | 8.1.7.1 PT initiated mobility | o | pc_mac_mob is optional (Table B.2.3-7) | | | finds a more suitable route to sink due to higher RSSI-2 | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/ASS/RES/01 | Check that the IUT sends a valid Association Response | ETSI TS 103 636-4 [4], clause 6.4.2.5 | FT | CF02 | pc_mac_ass_ft | 8.1.8.1 Association Response and Release | m | pc_mac_ass_ft: mandatory if FT mode (Table B.2.3-8 c.2) | | | message | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/ASS/RES/02 | Check that the IUT sends an Association Response message | ETSI TS 103 636-4 [4], clause 5.8.5 | FT | CF02 | pc_mac_ass_ft | 8.1.8.1 Association Response and Release | m | pc_mac_ass_ft: mandatory if FT mode (Table B.2.3-8 c.2) | | | upon receiving an Association request message | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/ASS/REQ/01 | Check that the IUT sends a valid Association Request message | ETSI TS 103 636-4 [4], clause 6.4.2.4 | PT | CF03 | pc_mac_ass_pt | 8.1.8.2 Association Request and Release | m | pc_mac_ass_pt: mandatory if PT mode (Table B.2.3-8 c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/ASS/REQ/02 | Check that the IUT initiates the association procedure by | ETSI TS 103 636-4 [4], clause 5.8.4 | PT | CF03 | pc_mac_ass_pt | 8.1.8.2 Association Request and Release | m | pc_mac_ass_pt: mandatory if PT mode (Table B.2.3-8 c.1) | | | sending an Association Request message | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/ASS/REQ/03 | Check that the IUT retries the Association Request procedure | ETSI TS 103 636-4 [4], clause 5.3.4 | PT | CF03 | pc_mac_ass_pt | 8.1.8.2 Association Request and Release | m | pc_mac_ass_pt: mandatory if PT mode (Table B.2.3-8 c.1) | | | when it does not receive a response in time | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/ASS/REQ/04 | Check that the IUT ends the Association procedure when it | ETSI TS 103 636-4 [4], clause 5.8.5 | PT | CF03 | pc_mac_ass_pt | 8.1.8.2 Association Request and Release | m | pc_mac_ass_pt: mandatory if PT mode (Table B.2.3-8 c.1) | | | receives an association response indicating accepted | | | | | | | | | | association | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/ASS/REQ/05 | Check that the IUT behaves correctly when it receives an | ETSI TS 103 636-4 [4], clause 5.8.5 | PT | CF03 | pc_mac_ass_pt | 8.1.8.2 Association Request and Release | m | pc_mac_ass_pt: mandatory if PT mode (Table B.2.3-8 c.1) | | | association response indicating rejected association | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/ASS/REL/01 | Check the validity of the Association Release message | ETSI TS 103 636-4 [4], clause 6.4.2.6 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_ass | 8.1.7.1 PT initiated mobility | m | pc_mac_ass: mandatory for both FT and PT (Table | | | | | | | | | | B.2.3-8) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/ASS/REL/02 | Check that the IUT releases its association with the sender | ETSI TS 103 636-4 [4], clause 6.4.2.6 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_ass | 8.1.8.1 Association Response and Release 8.1.8.2 | m | pc_mac_ass: mandatory for both FT and PT (Table | | | when it receives an Association Release message | | | | | Association Request and Release | | B.2.3-8) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SEC/01 | Check that the IUT discards the received MAC PDU when the | ETSI TS 103 636-4 [4], clause 5 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_sec | 8.1.9.1 Mode 1 as PT 8.1.9.2 Mode 1 as FT | o | pc_mac_sec is optional (Table B.2.3-9) | | | MIC is incorrect | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SEC/02 | Check that IUT correctly deciphers a MAC PDU | ETSI TS 103 636-4 [4], clause 5 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_sec | 8.1.9.1 Mode 1 as PT 8.1.9.2 Mode 1 as FT | o | pc_mac_sec is optional (Table B.2.3-9) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/SEC/03 | Check that the IUT includes the MIC in a MAC PDU and ciphers | ETSI TS 103 636-4 [4], clause 5 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_mac_sec_mode1 | 8.1.9.1 Mode 1 as PT 8.1.9.2 Mode 1 as FT | o | pc_mac_sec_mode1 is optional (Table B.2.3-9) | | | it when security is used | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/PG/01 | Check that the IUT is able to transmit a paging to a PT | ETSI TS 103 636-4 [4], clause 5.12 | FT | CF02 | pc_mac_pg | 8.1.10.1 Paging | o | pc_mac_pg is optional (Table B.2.3-12) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/MAC/PG/02 | Check that the IUT is able to receive a paging indication | ETSI TS 103 636-4 [4], clause 5.12 | PT | CF03 | pc_mac_rach_tx, pc_mac_pg | 8.1.10.2 Paging response | o | pc_mac_pg is optional (Table B.2.3-12) | | | and send a response | | | | | | | | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/DLC/RETX/01 | Check that the IUT retransmits a DLC SDU or segment when | ETSI TS 103 636-5 [5], clause 5.2.6 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_dlc_st2, pc_dlc_st3 | 8.2.2 DLC Retransmissions (ARQ) using implicit ACK/NACK | o.1 | pc_dlc_st2/st3: at least one DLC service type mandatory | | | receiving a MAC HARQ NACK feedback | | | | | | | (Table B.2.4-1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/DLC/RETX/02 | Check that the IUT transmits a new DLC SDU or segment when | ETSI TS 103 636-5 [5], clause 5.2.6 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_dlc_st1, pc_dlc_st2, pc_dlc_st3 | 8.2.2 DLC Retransmissions (ARQ) using implicit ACK/NACK | o.1 | pc_dlc_st1/st2/st3: at least one DLC service type | | | receiving a MAC HARQ ACK feedback | | | | | | | mandatory (Table B.2.4-1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/DLC/ROU/01 | Check that the IUT routes an uplink packet towards the | ETSI TS 103 636-5 [5], clause 5.2.8.2 | FT-PT | CF04 or CF06 | pc_dlc_routing_000 | 8.2.4.1 Uplink hop-by-hop (Routing type 000) | c | pc_dlc_routing_000: mandatory if mesh topology, else | | | backend | | | | | | | optional (Table B.2.4-3 c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/DLC/ROU/02 | Check that the IUT having backend connectivity provides the | ETSI TS 103 636-5 [5], clause 5.2.8.2 | FT | CF02 | pc_dlc_routing_000 | 8.2.4.1 Uplink hop-by-hop (Routing type 000) | c | pc_dlc_routing_000: mandatory if mesh topology, else | | | received DLC SDU to the CVG layer at the backend interface | | | | | | | optional (Table B.2.4-3 c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/DLC/ROU/03 | Check that the IUT receives a packet when the routing header | ETSI TS 103 636-5 [5], clause 5.2.8.2 | PT or FT-PT | IF Mode=PT: CF03; IF Mode=FT-PT: CF06 | pc_dlc_routing_011 | 8.2.4.2 Downlink flooding (Routing type 011) | c | pc_dlc_routing_011: mandatory if mesh topology, else | | | indicates it as the destination | | | | | | | optional (Table B.2.4-3 c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/DLC/ROU/04 | Check that the IUT routes a downlink unicast packet to its | ETSI TS 103 636-5 [5], clause 5.2.8.2 | FT-PT | CF04 | pc_dlc_routing_011 | 8.2.4.2 Downlink flooding (Routing type 011) | c | pc_dlc_routing_011: mandatory if mesh topology, else | | | destination when it is an associated RD | | | | | | | optional (Table B.2.4-3 c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/DLC/ROU/05 | Check that the IUT routes a downlink unicast packet by | ETSI TS 103 636-5 [5], clause 5.2.8.2 | FT-PT | CF06 | pc_dlc_routing_011 | 8.2.4.2 Downlink flooding (Routing type 011) | c | pc_dlc_routing_011: mandatory if mesh topology, else | | | flooding when the destination is not an associated RD | | | | | | | optional (Table B.2.4-3 c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/DLC/ROU/06 | Check that the IUT routes a broadcast packet to all | ETSI TS 103 636-5 [5], clause 5.2.8.2 | FT-PT | CF06 | pc_dlc_routing_011 | 8.2.4.2 Downlink flooding (Routing type 011) | c | pc_dlc_routing_011: mandatory if mesh topology, else | | | associated RDs | | | | | | | optional (Table B.2.4-3 c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/CVG/DR/01 | Check that the IUT discards a duplicate CVG PDU on reception | ETSI TS 103 636-5 [5], clause 6.2.5 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_cvg_dup | 8.3.3 Duplicate removal procedure | o | pc_cvg_dup: optional if CVG service type 1-4 (Table | | | | | | | | | | B.2.5-3 c.1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/CVG/SEG/01 | Check that the IUT correctly sends a first segment of a CVG | ETSI TS 103 636-5 [5], clause 6.2.7 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_cvg_st2, pc_cvg_st3, pc_cvg_st4 | 8.3.5 CVG Segmentation | o.1 | pc_cvg_st2/st3/st4: at least one CVG service type | | | PDU | | | | | | | mandatory (Table B.2.5-1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/CVG/SEG/02 | Check that the IUT correctly sends an intermediate segment | ETSI TS 103 636-5 [5], clause 6.2.7 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_cvg_st2, pc_cvg_st3, pc_cvg_st4 | 8.3.5 CVG Segmentation | o.1 | pc_cvg_st2/st3/st4: at least one CVG service type | | | of a CVG PDU | | | | | | | mandatory (Table B.2.5-1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+ | DECTNR/CVG/SEG/03 | Check that the IUT correctly sends the last segment of a CVG | ETSI TS 103 636-5 [5], clause 6.2.7 | FT or PT | IF Mode=FT: CF02; IF Mode=PT: CF03 | pc_cvg_st2, pc_cvg_st3, pc_cvg_st4 | 8.3.5 CVG Segmentation | o.1 | pc_cvg_st2/st3/st4: at least one CVG service type | | | PDU | | | | | | | mandatory (Table B.2.5-1) | +--------------------------+--------------------------------------------------------------+--------------------------------------------------+---------------+--------------------------------------------+----------------------------------------------------+---------------------------------------------------------+----------+---------------------------------------------------------+